Ansible-Exemple

nano inventaire.yml

inventaire.yml

all:
  vars:
    ansible_python_interpreter: /bin/python3
  children:
    deb_master:
      vars:
        ansible_user: ansible  # Utilisateur pour se connecter en SSH
        dns_redirecteur:
          - "10.100.0.3"
          - "10.0.0.3"
        allow_query: "10.102.200.0/16"  # Sous-réseau autorisé
        network_interfaces:
          - name: "ens33"
            ip_address: "10.102.200.153"
            netmask: "255.255.0.0"
            gateway: "10.102.200.254"
          #- name: "eth1"
          #  ip_address: "192.168.1.10"
          #  netmask: "255.255.255.0"
          #  gateway: "192.168.1.1"
      hosts:
        10.102.200.153:
    deb_slave:
      vars:
        ansible_user: ansible  # Utilisateur pour se connecter en SSH
        dns_redirecteur:
          - "10.100.0.3"
          - "10.0.0.3"
        allow_query: "10.102.200.0/16"  # Sous-réseau autorisé
        network_interfaces:
          - name: "ens33"
            ip_address: "10.102.200.80"
            netmask: "255.255.0.0"
            gateway: "10.102.200.254"
          #- name: "eth1"
          #  ip_address: "192.168.1.10"
          #  netmask: "255.255.255.0"
          #  gateway: "192.168.1.1"
      hosts:
        10.102.200.80:

nano Playbook_Install_Config_LAN.yml

Playbook_Install_Config_LAN.yml

---
- name: Playbook pour configurer les interfaces réseau
  hosts: all
  become: yes
  tasks:

    - name: Configurer les interfaces réseau
      template:
        src: Templates_interfaces_Debian11.j2
        dest: /etc/network/interfaces
        owner: root
        group: root
        mode: '0644'
        backup: yes
      notify:
        - Restart Networking

  handlers:
    - name: Restart Networking
      ansible.builtin.systemd:
        name: networking
        state: restarted

    - name: Bring up network interfaces
      ansible.builtin.command:
        cmd: "ifup {{ item.name }}"
      loop: "{{ network_interfaces }}"

nano Templates_interfaces_Debian.j2

Templates_interfaces_Debian.j2

# Configuration réseau générée par Ansible
 
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
 
# Inclure les configurations d'autres interfaces, si présentes
source /etc/network/interfaces.d/*
 
# Interface de bouclage (loopback)
auto lo
iface lo inet loopback
 
{% for iface in network_interfaces %}
auto {{ iface.name }}
iface {{ iface.name }} inet static
    address {{ iface.ip_address }}
    netmask {{ iface.netmask }}
    gateway {{ iface.gateway }}
{% endfor %}
[ansible@srv-ansible projet1]$

nano Playbook_Install_Apache2.yml

Playbook_Install_Apache2.yml

---
- hosts: all
  become: yes  # Permet de s'assurer que les tâches sont exécutées avec les privilèges sudo
  tasks:
    - name: Update the APT package list
      apt:
        update_cache: yes

    - name: Install Apache
      apt:
        name: apache2
        state: present

    - name: Ensure Apache is started and enabled
      systemd:
        name: apache2
        state: started
        enabled: yes

nano Playbook_Install_Config_Bind9.yml

Playbook_Install_Config_Bind9.yml

---
- name: Playbook pour installer/configurer/sécuriser SSH et installer/configurer BIND
  hosts: all
  become: yes
  tasks:

    - name: Installer le service BIND
      apt:
        name: bind9
        state: present
        update_cache: yes

    - name: Configurer BIND avec un DNS redirecteur et désactiver DNSSEC
      template:
        src: Templates_named.conf.options.j2
        dest: /etc/bind/named.conf.options
        owner: root
        group: bind
        mode: '0644'
      notify:
        - Restart BIND

  handlers:
    - name: Restart BIND
      service:
        name: bind9
        state: restarted

nano Templates_named.conf.options.j2

Templates_named.conf.options.j2

options {
    directory "/var/cache/bind";
 
    // Adresses des DNS redirecteurs remplacé par la variable appropriée situé dans le fichier inventaire.yml
    forwarders {
        {% for dns in dns_redirecteur %}
            {{ dns }};
        {% endfor %}
    };
 
    dnssec-validation no;
 
    // Redirection unique (forward only)
    forward only;
 
    auth-nxdomain no;    # conform to RFC1035
    listen-on { any; };
    listen-on-v6 { any; };
 
    // Permet uniquement les requêtes des adresses spécifier dans le fichier inventaire.yml
    allow-query {
        {{ allow_query | default('any') }};
    };
 
};